THE MAINTENANCE SECRET OF WIND PIPE PRODUCTION LINE

source: gzcomifo; Time: 07/07/2020 Clicks: 128

The maintenance of the air duct production line is what all customers should pay attention to. Only by strengthening the maintenance of the air duct production line, can the machine operate and operate normally, ensure that the daily work of the air duct production line does not break down and stop, and ensure the daily high work efficiency and quality. Next, for you to introduce a few duct production line maintenance tips.



1. Cleaning of air duct production line

In the long-term work process of the air duct production line, a lot of materials and sundries will be left, so the air duct production line needs to be cleaned and maintained in time to avoid problems. Here are three cleaning methods for air duct production line:



(1) Gas flushing

&Nbsp; the hose with nozzle connected to the air duct can deliver compressed air to drive dust and dirt from the air duct to the vacuum collecting container, so as to remove dust and sundries.



(2) Vacuum suction

&Nbsp; this method requires a cleaning tool, called vacuum suction. The vacuum suction pipe adopts the hand-held type, and the brush can directly contact the inner wall of the pipe so as to achieve the purpose of cleaning the dirt in the pipe. But there is a requirement to adopt this method, that is, the manhole of air duct must be large enough. In addition, because the air duct can not form enough negative pressure conditions, it is likely that this cleaning method will leak some stains.



(3) Power wash

&The power of this way comes from pneumatic or electric. Under the action of pneumatic or electric power, the brush moves the dirt in the air duct, and then the dirt is transported to the vacuum collector by the way of gas washing. In this way, it should be noted that the surface of the insulation material is damaged during the cleaning process.
2. Routine maintenance of air duct production line

The air duct production line should also pay attention to the daily maintenance of the machine in daily use. The following points should be noted:

(1) Check the working condition of the air duct production line frequently, correct the problems found in time, and forbid the machine to run with faults to prevent the occurrence of safety accidents.

(2) Keep the appearance of air duct production line clean at all times. When it is not used for a long time, the surface shall be coated with anti rust grease.

(3) The operator shall operate correctly according to the specification, and understand and master the performance and operation method of the machine. It is strictly forbidden to operate by non professionals.



3. Regular maintenance of air duct production line

(1) Regularly add proper amount of lubricating oil to the driving teeth of the air duct production line, which can greatly reduce the wear degree of the machine in operation.

(2) Generally, the maintenance period of the air duct production line is half a year, and the machine and equipment are disassembled regularly for inspection and maintenance.

Comifo Duct Manufacture Machine Co., Ltd is one of Comifo group member, the leading company which specializes in machine manufacture, involving in Heating, Ventilation and Air Conditioning (HVAC) fabrication, cable tray fabrication, coil processing, roll forming, etc. We provide duct making equipment, duct fabrication equipment, hvac duct fabrication equipment,duct manufacturing machines and etc. Want to know more, please contact us.

THE BASIS OF DISTINGUISHING QUALITY OF AIR PIPE PRODUCTION LINE

source: gzcomifo; Time: 07/14/2020 Clicks: 124

First of all, it is clear about the manufacturer of the air duct production line. The price of automatic production line is quite expensive, often several hundred thousand, so before we buy it, we must send someone to the factory for field investigation before we can make a decision. Manufacturers with complete equipment, large scale and standardized production are preferred.



Secondly, the process and equipment flow of the manufacturer of air duct production line is investigated. Only advanced equipment technology can produce high-quality and high-precision air duct, so the manufacturer with strong R & D technology and deep manufacturing experience is the first choice.



Moreover, we know whether the authority approval of the air duct production line manufacturer has passed the certification of ISO9001 and other relevant authorities. Only when the quality is guaranteed, can we ensure the quality of our products.



Finally, understand the sales situation of the manufacturer of the air duct production line. Good product reputation is naturally good. Only when the person who has bought and used it has said it is good, can it be used as one of the basis for judgment.



From the above points of attention, we can basically purchase a good quality air duct production line. Purchase water depth, but ensure quality is the bottom line, especially for machines with high quality and specification requirements.

Comifo Duct Manufacture Machine Co., Ltd is one of Comifo group member, the leading company which specializes in machine manufacture, involving in Heating, Ventilation and Air Conditioning (HVAC) fabrication, cable tray fabrication, coil processing, roll forming, etc. We provide duct making equipment, duct fabrication equipment, hvac duct fabrication equipment,hvac duct manufacturing machines and etc. Want to know more, please contact us.

FACTORS INFLUENCING THE PRICE OF WIND PIPE PRODUCTION LINE

source: gzcomifo; Time: 07/21/2020 Clicks: 130

There are many factors that affect the price of air duct production line:



1. Price of steel raw materials

The price fluctuation of steel raw materials is one of the important factors affecting the price of the air duct production line. Because of the instability of the raw materials just now, the price of the air duct production line will also fluctuate accordingly. According to the different amount of steel raw materials used in different air duct production lines, the price will also be adjusted with different ranges.



2. Transportation expenses

Due to different regions where the buyer is located, the air duct production line purchased by the buyer needs to be transported to the region where the buyer is located. Then the selling price of the air duct production line will be different for different transportation costs. If the buyer is close to the manufacturer, the price will generally be cheaper than the price of the air duct production line far away.



3. Control system

At the request of the buyer, different buyers may choose the control system of different air duct production lines. Generally speaking, the standard air duct production line system of the manufacturer can almost meet the production requirements of most buyers. Under the special requirements of the buyer, different air duct production line control systems may cause different prices of the air duct production lines and make adjustments.



4. Accessories and parts

The quality of the accessories and parts of the air duct production line will also have some impact on the price of the air duct production line. Some small-scale air duct production line manufacturers may choose some cheaper accessories and parts, so that the cost of the air duct production line will be reduced, and its sales price will also be cheaper for large-scale manufacturers.



5. others

There are other factors that affect the price of the air duct production line. For example, different cost of human resources, rent, price level, etc. all affect the sales price of the air duct production line.

Comifo Duct Manufacture Machine Co., Ltd is one of Comifo group member, the leading company which specializes in machine manufacture, involving in Heating, Ventilation and Air Conditioning (HVAC) fabrication, cable tray fabrication, coil processing, roll forming, etc. We provide hvac duct manufacturing machines, hvac duct fabrication equipment and etc. Want to know more, please contact us.

HOW TO ENSURE THE QUALITY OF FULLY AUTOMATIC AIR DUCT PRODUCTION LINE

source: gzcomifo; Time: 07/28/2020 Clicks: 107

The quality of the automatic air duct production line will have a great impact on the overall working effect and efficiency of the air duct. Today, the air duct manufacturer takes you into the quality inspection process of the automatic air duct production line, which you can't help but understand.



1. First, check whether the air pipeline manufacturer has passed the ISO9001 quality standard certification. Only through the certification of product quality can we get relative basic guarantee.



2. Secondly, understand the quality system and operation of the whole air duct production. Because the price of the automatic air duct production line is relatively high, the selection and purchase of it must be decided by a special person on the spot.



3. We also need to know the subcontractors of the whole air pipeline production enterprises. The manufacturer of the supporting products of the automatic air duct production line should also pass this certification.



4. Finally, it is necessary to investigate the technological equipment level of air pipeline production enterprises. Process equipment is an important material means to ensure product quality. If we do the above, we believe that the quality of the air duct production line can be better guaranteed.



In fact, the water depth of mechanical products procurement, no matter what the industry has stipulated, the product quality is actually a red line that can not be touched, especially for the full-automatic air duct production line, which has higher requirements on specifications and quality, in principle, as long as the above four points are done well, qualified air duct production line can be purchased when purchasing.

Comifo Duct Manufacture Machine Co., Ltd is one of Comifo group member, the leading company which specializes in machine manufacture, involving in Heating, Ventilation and Air Conditioning (HVAC) fabrication, cable tray fabrication, coil processing, roll forming, etc. We provide duct fabrication equipment, hvac duct fabrication equipment,hvac duct manufacturing machines and etc. Want to know more, please contact us.

SQUARE DUCT MACHINE FAILURES AND SOLUTIONS

source: gzcomifo; Time: 10/23/2018 Clicks: 371

Square duct machine in use for some time prone to some problems, the following examples illustrate the problems and solutions:

1. The touch screen displays the hydraulic overload alarm and blinks

Solution: Check the pressure of hydraulic system in square duct machine system is too high, the oil pump is damaged lead to thermal relay trip, open the electrical box cover, manual reset thermal relay.

2. Touch screen display system emergency stop and servo alarm and flashing

Solution: Release the emergency button on the touch screen of the square duct machine.

3. Uncoiler discharge or non-stop feeding.

Solution: Check the square duct machine rack picking photoelectric switch is damaged or disconnected. Unwinding machine time relay damage, check replacement.

Comifo Duct Manufacture Machine Co., Ltd is one of Comifo group member, the leading company which specializes in machine manufacture, involving in Heating, Ventilation and Air Conditioning (HVAC) fabrication, cable tray fabrication, coil processing, roll forming, etc. We provide duct making equipment, duct fabrication equipment, hvac duct fabrication equipment,hvac duct manufacturing machines and etc. Want to know more, please contact us.

AIR DUCT MACHINES

 Air duct machine is the abbreviation of hidden air conditioner, which can also be called air conditioner air duct machine or air duct machine air conditioner. The indoor unit of the air-conditioning duct machine is the same as one end (fan coil unit) of the central air-conditioning, and both adopt the form of suspended ceiling. There is no difference between them in appearance. Compared with the central air conditioner, the air duct machine air conditioner is cheap in cost and convenient to maintain, and is suitable for people's air conditioner usage habits.

 

Considering aesthetic and economic factors, air duct machines are also widely used in household central air conditioning systems. At present, an indoor unit and the corresponding outdoor unit are widely used as an independent system of air duct machines. This machine solves the problems of hanging up and bare cabinet machines affecting beauty. At the same time, the length of running pipes is longer than that of ordinary household air conditioners, and the installation is relatively flexible. Customers can choose to install one or more of them according to actual needs.

 

The air conditioner is connected with an air pipe to supply air to the room. The so-called high static pressure air pipe machine means that the blower used by the air pipe air conditioner is a high static pressure fan. The static pressure of the air conditioner is equivalent to the residual pressure outside the machine, which is a parameter of the air supply capacity of the air conditioner. The greater the static pressure, the longer the air supply lift. Because the air supply of the air duct type air conditioner needs to pass through the air duct, the loss of air pressure would be increased in the air supply process. If the high static pressure fan is not used, the wind sent to the room would be very little.

 

 

Advantages: Compared with the central air conditioner, the air duct machine air conditioner has lower cost, with the exactly same indoor decoration effect as that of the central air conditioner. Besides, the maintenance is convenient, which is more suitable for the air conditioner usage habits of the Chinese people.

 

Related News

 

• The Use Of Duct Folding Machine

• How To Prolong The Service Life Of The Consumed Parts Of Plasma Cutting Machine

• Plasma Cutting Machine Safety Precautions And Maintenance

• How Does The Plasma Cutter Operate?

• Duct Forming Machine Eight Functions

• Seven Advantages Of Flange Forming Machine

 

Comifo Group specializes in air duct machine manufacturing, contracting and selling HVAC air conditioning equipments, HVAC machinery, valve and actuators,air duct machine,HVAC duct manufacturing.

 

Comifo Duct Manufacture Machine Co., Ltd is one of Comifo group member, the leading company which specializes in machine manufacture, involving in Heating, Ventilation and Air Conditioning (HVAC) fabrication, cable tray fabrication, coil processing, roll forming, etc.

 

With its advanced technology, Comifo grows to be a company of designing, manufacturing and selling air duct machine,air duct manufacturing machines to customers all over the world, from whom we obtain reputation and precious improvement advice to meet the world’s verifying technology. This is so called INNOVATION, the spirit of the ever-lasting development of a company, impresses the world of machinery.

THE CLEANING OF THE WIND PIPE PRODUCTION LINE IS VERY IMPORTANT

 The air duct production line is mainly a kind of mechanical equipment for producing air duct. According to the characteristics of air duct, it can complete a whole set of production and processing independently, which greatly improves the production efficiency of the enterprise. For the manufacturer of air duct production line, it is necessary to know not only the maintenance method of the air duct production line, but also the cleaning method of the air duct production line. Next, we will have a detailed understanding of the main cleaning methods of the air duct production line.

 

Of course, it can also be cleaned manually. It is a simpler and more effective way to clean the places where the air duct production line cannot reach. It will not cause damage to the parts on the air duct production line equipment.

 

Using the vacuum collecting container to clean up the sundries on the air duct production line, and there must be a lot of iron chips on the equipment used for a long time. Using this method to clean up, it is more convenient and efficient, and it is an ideal method.

 

Related News

 

• Lock Former Machine Use Points

• Functions of Different Air Duct Equipment

• Duct Production Line When The Duct Connection

• Duct Roll Forming Machine Six Major Matters Needing Attention

• Knowledge Of Metal Materials For Ventilation Pipe Processing

• Plasma Cutting Machine Accessories Maintenance

 

Comifo Group specializes in air duct machine manufacturing, contracting and selling HVAC air conditioning equipments, HVAC machinery, valve and actuators,air duct machine,HVAC duct manufacturing.

 

Comifo Duct Manufacture Machine Co., Ltd is one of Comifo group member, the leading company which specializes in machine manufacture, involving in Heating, Ventilation and Air Conditioning (HVAC) fabrication, cable tray fabrication, coil processing, roll forming, etc.

 

With its advanced technology, Comifo grows to be a company of designing, manufacturing and selling air duct machine,air ductwork fabrication equipment to customers all over the world, from whom we obtain reputation and precious improvement advice to meet the world’s verifying technology. This is so called INNOVATION, the spirit of the ever-lasting development of a company, impresses the world of machinery.